There are many ways to tell fake iPhone LCD
screens from original OEM without having to put each one under a microscope or
taking up too much of your time. Many
identification methods are outdated and the factories that manufacture the fake
iPhone LCDs are always coming up with new methods to mask known visual
inspection methods. You can identify fake iPhone screens easily with a few
simple techniques that will cover 98% of product, no matter how much a supplier
tries to replicate the real thing.
1.
Resolution Quality
Cell phone LCD screen
resolutions are being manufactured with higher resolutions in a rapid way.
Cutting corners on resolution quality is the number one way for factories to
reduce costs. Being that most new models have retina or HD quality DPI, you
should be able to easily identify a fake iPhone screen from the original. Make
sure you have a known, real, original LCD to compare with and download a high
resolution photo for testing comparison.
2.
Flex Cable Markings
The second most common way to identify a fake
iPhone LCD is through markings on the digitizer and LCD flex cables. The main
one I look at is just the digitizer flex because it wouldn’t make sense for
anyone to manufacture a fake LCD with an original digitizer. That would be like
putting V8 engine in a VW Beetle. Additionally, Apple does work with customs
officials in various countries to size fake poor quality refurbish screens.
It’s a way that custom agents can spot fake iPhone parts without Apple having
to provide a field manual that’s difficult to enforce.
3.
LCD Flex Cable IC Chip
There is a chip on the LCD flex cable that
regulates power and display information from the main board to the LCD itself.
You’ll know you have a fake iPhone LCD (or at best poor quality refurbished
original) if the upside-down triangle is missing from the IC chip. One would
think the copy factories would enjoy reducing their cost by removing a chunk of
raw material on this cover, but they don’t. I would assume it’s more costly to
cut out the triangle design on the cover than to save the material cost.
Not so many fake iPhone LCD
screens are on the market these days. There are so many broken LCD screens
being reclaimed that it costs less to refurbish a used cracked iPhone screen
than it does to manufacture a new fake iPhone screen. No matter what the LCD
model, the trends to spot fake iPhone parts tends to stay the same. LCD screens
are becoming larger and smarter, and it shows in the more expensive parts costs
for models such as the iPhone 5s, Note II, etc. Neglecting to keep your
suppliers product in check is a recipe for being taken advantage of and wasting
money. By knowing how to spot fake parts, it will ensure you’re staying competitive
in the cell phone repair business.
Now, if you are going to
buy the cheapest LCD from your supplier and asked “Are these new?” you will
mostly likely be answered with a “yes”. The LCD must be new but be sure that it
was a fake LCD made only to shave off the cost and you should be ready to
compromise with possibly DPI and resolution or color brightness or quality of
workmanship. Also there are instances where the LCD may be original but the
flex cables may be produced from a secondary below standard factory. In such
cases it is rather impossible though for a non-technical person to spot the
difference yet if one holds an original assembly of Apple LCD along with a fake
one it may be quite possible to differentiate the two.
Here, we provide Grade O
quality as the original LCD glass with no dots and no scratches. We can make
sure that our iPhone 5s LCD screen replacement go through QC testing in
order to receive the best quality screen parts.
No comments:
Post a Comment