Tempered glass protective film product knowledge

With the mobile phone features intelligent transformation, in recent years the mobile phone accessories also formed a huge industrial chain, of which the protective film for mobile phone is typical. There are a wide variety of screen protection films on the market, but generally most films are made of transparent materials rely on static and adhesive attached to screen. The shortcomings of this type of product is easy to fall off, blistering, short life, no anti-scratch, not shockproof, easy to paste and so on. And now market has emerged a new type of protective film - tempered glass screen protective film will not be troubled by the above problems.

Tempered glass protective film only need to cover the overlay on the phone screen can be, users do not like the use of thin film generally carefully paste, because the tempered glass protective film with automatic exhaust function does not appear ugly bubble. Tempered glass protective film can be anti-fragmentation, anti-scratch and anti-crash, its toughness is also sufficient to protect the mobile phone display to avoid to heavy pressure.

Tempered glass or Reinforced glass is a safety glass. Tempered glass is actually a kind of pre-stressed glass. In order to improve the strength of glass, it is usually used to produce compressive stress on the glass surface by chemical or physical method. When the glass is subjected to external force, the surface stress is first offset, which improves the carrying capacity and enhances the glass self anti-Wind pressure, cold and heat, impact and so on.

Tempered glass protective film by the tempered glass and special AB double-sided adhesive, which AB double-sided adhesive to PET is based on the side of the silicone side is the acrylic glue, silicone (automatic exhaust) fit on the phone screen, and acrylic adhesive fit Tempered glass.

Tempered glass protective film is the most widely used in Europe, to this end, is the main supplier of glass protective film products are the European market, tempered glass protective film in China will also quickly spread, and will form a huge industry chain market The Although the tempered glass protective film is a new type of mobile phone protective film, the production of glass protective film manufacturers are many, according to incomplete statistics about 100 domestic, mainly concentrated in Guangdong, and growing.

But the market is the vast majority of the quality of the tempered glass protective film there is a big problem, mainly in the following areas: a) poor exhaust gas surface residual bubble phenomenon; b) tempered glass around the corner paste, D) tempered glass is too thick, affecting the light transmittance, and thicken the thickness of the phone; e) tempered glass paste from the glue is too thick, affecting the phone through the through Light rate; f) tempered glass paste from the phone, the phone surface watermarking phenomenon.

Dedicated to the phone a wide range of tempered glass, uneven quality, high-quality tempered glass is not much, do not have a big brand influence. Most of the market is 0.33mm and 0.4mm thickness of the tempered glass, which provides 0.21mm and has a good material is Kangming, Ju Zhe and other manufacturers, can provide less than 0.2mm and have high-quality tempered glass manufacturers very few.

According to the market reaction, many manufacturers are bad phenomenon. (The exhaust is not good, the phone surface residual bubbles; tempered glass around the corner of the sticky; tempered glass and the phone cannot stick, easy to fall off; tempered glass is too thick, affecting the light transmittance, and thicken the thickness of the phone; Paste the glue is too thick; tempered glass paste from the phone, the phone surface watermark phenomenon.) It is understood, Cell Phone Age com has been developed 10 years ago, 4 years ago has been put into production, for product technology storage, has not Market sales. But AB double-sided adhesive on the tempered glass material requirements are relatively high, if the material in the poor quality of the glass will appear on the watermark phenomenon, after a few hours will automatically disappear.

Tempered glass protective film is a new product, there are still many problems in the processing, which is the problem troubled by the production of finished glass products plagued, mainly in two aspects: First, the level of processing is not advanced lead to product quality, Second, the greater the level of processing damage the greater the amount of material, a direct result of cost waste. Among them, Cell Phone Age can provide AB double-sided adhesive, but also with advanced processing equipment, can directly provide the product sheet manufacturers, which also makes the finished glass protective film manufacturers favored.

Tempered glass protective film is a new product, the industry chain has just started, but with great market prospects. Dedicated to the tempered glass AB double-sided adhesive and tempered glass products and processing technology levels have to be improved to meet the modern people requirements on the phone high quality and personality.

Now online shopping is much convenient and affordable than ten years before, because of cheaper price and faster shipping. Now only cost less than 6 USD you can get a 3D Curved Full Cover Tempered Glass Film for iPhone 7 from Cell Phone Age com.

How to protect privacy from being leaked in case of iPhone 6 lost?

There are a lot of friends around who lost their iPhone 6 in recently, but the case of phone was finally refund is quietly rare, orange brother and Matt's story is more likely to occur often, not every when pick up the iPhone will hold the heart of returning. Mobile phone manufacturers are now beginning to pay more attention to mobile phone security, which is seen as a service to perfect user experience, although once lost the phone may not be able to find back, at least we can improve the probability of recovery.

When we buy a new iPhone 6, the first time may be to install a variety of applications and games for your new phone. We tend to forget to for iPhone add a "insurance", if you think the lost iPhone to be able to recover is good luck, then we will increase the chance of this luck. iPhone is missing we may not be able to recover, but at least we can through Apple's official way to do some of the best efforts, at least we can protect our data is not stolen, but also to retrieve lost information, such as photos and Contacts, etc., so that we can guarantee that we suffer the least loss.

Protect sensitive information

With the popularity of the iPhone 6, more and more consumers began to know how to identify an iPhone is a new machine that is, using the iPhone serial number (or MEID) to Apple's official website for verification. Although the serial number for mobile phone search and cannot play a substantial role, but keep their own device serial number is necessary. Many friends in the sharing of their own settings when the page, often forgot to serial numbers and MEID and other sensitive information "code", which may be used by some bad people, although the probability is very small, but this Does not mean it will not happen. In addition, the phone is lost, a friend pointed out that the report may also use the serial number, so we should pay attention to protect this sensitive information. Keep the iPhone 6 mobile phone box is of course the best, but if you do not have reservations, then do not panic, iTunes backup can also help you find the device serial number and other information.

In addition we also need to understand a concept, which is UDID. UDID can be associated with a variety of other data to the relevant equipment. For example, connecting to a developer account allows you to install or test your application before publishing, or you can let the developer get an iOS beta experience. UDID can be used as an entry to your account, just as someone else has no password to log in to your account; it will be linked to many other privacy information; but no one guarantees the security of the information.

Let's talk about our most commonly used Apple ID, which deals with App Store's application purchase, iMessage and Face Time services are open, the most important thing is iCloud. iCloud which also contains a lot of important information, such as photos, contacts, and find the iPhone and other key features, so Apple ID. The account and password once lost, it is very troublesome, and basically iPhone 6 was given to others.

Data backup

We have to do the worst plan, if the iPhone 6 is really lost, then we also hope to be able to retrieve our data, this time we have to use the data backup. Once again, if you do not have a local backup in iTunes, then it will once again rely on iCloud cloud backup, at least we can retrieve the device on the contact information, photos. It is worth noting that when you change the password or when shopping, Apple may send a confirmation email to your mailbox, then we should pay attention to see whether the source of the message belongs to Apple's official website, especially in the click link to open to another A web page, because this time you are likely to be "fishing", if the non-Apple web pages enter the Apple ID password, then your account and information security on the precarious.

Don’t give up even if lost

First of all, we can through the friend's iPhone (or iOS device) landing to find my iPhone (provided that iCloud and AppleID is not lost) or PC-side landing iCloud page to the lost device to play the sound, lost mode or wipe Out of iPhone and other operations. If the iPhone 6 is still nearby, playing the sound can make the device sound, so you quickly find the target. Missing mode can be entered so that the thieves contact the number, or enter the text content, so that the other side to see. Erase the iPhone can let you protect the important information on the device, so as not to be stolen by the other.

The faster the operation described above the better, since the device may have not been shut down (or exhausted) at this time, which gives us time to position the thief in general and improve the likelihood of being retrieved. If the iPhone 6 is running out of power, then we'd better open the Apple in iOS8 before adding new features - find my iPhone in the "send the final location", it allows iPhone power to reach the critical level to Apple to send iPhone Of the location information, this feature is still a little role, because it is likely that the thief in the foothold when the mobile phone power will be exhausted, we have the opportunity to confirm the final location of the phone (provided that the phone is not turned off).

If finally it seems you can’t get back your lost phone any more, you are suggested to choose to buy an refurbished unlocked iPhone 6 64GB from Cell Phone Age com as spare before the latest iPhone model released.

Phone Case material comparison among PC TPU silicone

With the rapid development of science and technology level, mobile phone beauty industry as a new born ushers in a potential future. Fashion IT brand follows the diversification of the market development. For the increase in mobile phone brands and functions related accessories were also diversified. Such as the one of most phone accessories phone case on materials includes PC, leather, and silicone, TPU, fabric, hard plastic, leather, metal tempered glass shell, soft plastic, velvet, silk and other categories. The Mobile phone shell not only as an ornament to make your phone a landscape, more able to protect mobile phones from drop, scratch, water and shock. Next Cell Phone Age com will talk about several materials’ advantages and disadvantages.

Silicone

Advantages: cheap, high adsorption performance, good buffer performance, easy to wear, more comprehensive protection. Disadvantages: texture thicker, less style, easy to greasy, and the body fit slightly worse, while the material is also slightly easy to stick ash and into the gray.

Different flexibility: silicone material protective cover is generally soft texture, good pull; feel slightly slippery, if the silicone inside the high pull material to add too little, then it is easy to be pulled off, how to know its high pull it? Hand the amount of light to pull the product, if the product has a white phenomenon, then the high tension is too small, if forced to pull a little white or no white phenomenon is qualified products.

Different molding processes:

Silicone molding process is the use of vulcanization molding; this process is the use of hydraulic pressure and pressure, with the mold to vulcanize the product out. This process is relatively low cost, high yield, the application is more common. It is used for monochrome silicone products. Can also be applied to two-color double hardness of the product or multi-color multi-hardness, but the product structure is not flexible, limited. Silicone mold is a mold from top to bottom; put a piece of silicone material cut, placed inside the mold, heating and pressure to make the product.

TPU

Advantages: high wear resistance, high strength, cold resistance, oil, water, resistant mold, good flexibility. Disadvantages: easy to deformation, easy to turn yellow.

TPU soft and hard characteristics between the rubber and plastic, TPU hardness range is quite wide, by changing the TPU reaction components of the ratio, you can get different hardness of the product and with the increase in hardness, and its products remain good Elasticity and abrasion resistance. Well-known abrasion resistance, tear resistance, and creep strength are excellent; high tensile strength, elongation, long-term compression and low permanent deformation rate are the significant advantages of TPU.

TPU is a plastic category, the product is injected into the molding process to do is to put a grain of plastic rice heating after melting, with a barrel into the plastic mold and made of products. TPU can be done that kind of transparent, the most permeable are very hazy like a thick fog that feeling. It is because of this transparent feeling TPU, now more popular with users. And TPU products are still a lot of high-grade, selectivity is relatively strong, pattern changes are more.

PC

Advantages: good light transmission, hardness, anti-fall, thin, good strength and toughness. Disadvantages: no anti-scraping, intolerant strong acid, intolerant alkali, impatient UV.

PC (polycarbonate) itself is a tough thermoplastic resin, PC material impact resistance, strength and toughness is very good, whether it is heavy or normal beat, as long as you are not trying to hit it with a stone, it is enough Longevity, while transparency is also high but its appearance is easier to scratch.

PC material for phone case has three kinds of technology: vacuum plating process: in the PC shell plating, electroplating finished carving some patterns, texture is good, but after a vacuum plating to a UV varnish. PC spray technology: you can spray the sense of rubber oil, this feel there are a lot of people like, and then the complex is in the colored (transparent red, transparent blue, transparent yellow, etc.) transparent PC shell spray a layer of primer, and then laser engraving some patterns , And finally had a rubber paint, this product is very upscale. PC water transfer thermal transfer process: PC shell to do some transfer up the pattern, and then spray UV varnish, or soft feel rubber oil. After the transfer of UV Varnish, hand pinching, the surface of the UV varnish is easier to split, so the best choice for the transfer process spray rubber oil, soft feel, the surface matte, do a good process , Will appear very upscale. The disadvantage is that the surface is not resistant to scraping, if a local out of the paint, the splash will go down the paint where it is easy to get off more and more. Transfer the advantages of pattern is very rich color.

With the users taste more and more critical, many mobile phone parts manufacturers have begun to make innovation on protective case material began to use composite materials to produce phone case. But on the whole, the physical properties of TPU material are relatively more prominent. But each kind of protective phone case also has its own advantages. TPU main features are low viscosity, good resistance to flexing, excellent wear resistance and high gloss. At present the new arrival TPU Protection Phone Case for iPhone 7 is only 12USD including shipping from Cell Phone Age com.

Apple investigates iPhone 8 battery-induced screen cracking events

October 8, according to media reports, Apple confirmed that they have started to investigate the iPhone 8 and iPhone 8 Plus screen cracking incident caused by battery Inflated. It is reported that the iPhone 8 series of mobile phones in the sale of less than two weeks’ time occurred several battery inflated events. Reported that Apple spokesman confirmed that Apple has launched an investigation of the incident, but did not disclose the number of mobile phones has been affected.

According to CNET website reported that at least from five countries and regions, users reported six battery inflated incident. In mainland China, recently, Guangzhou, Mr. Liu told the media that he bought an iPhone in original package in an electrical platform to open the package and found a burst, and he did not charge and other operations. This may be the first burst of iPhone 8 series phones in mainland China. Up to now, Apple iPhone 8 series phone battery problem is limited to expansion, did not occur fire events. However, regardless of the follow-up survey results, the occurrence of the battery inflated event will more or less affect the Apple iPhone 8 series sales.

Last year, Apple rival Samsung Galaxy Note 7 flagship smartphone also had a similar problem. At that time, Note 7 battery explosion, eventually leading to Samsung recall products, and completely discontinued Note 7. According to the US dismantling site iFixit had dismantled the iPhone 8 Plus situation, the phone battery from the Samsung SDI. It is worth noting that SDI is the supplier of Problem Machine Note 7.

After the iPhone 8 sale, the famous dismantling site iFixit on the Apple iPhone 8 was dismantled, and finally to the maintenance index is 6 points, full score is 10 points, the higher the score the easier it means maintenance. For Apple iPhone 8 this score in the flagship smartphones is quite high. Before dismantling, iFixit also on the iPhone 8 for X-ray exposure, you can clearly see the location of the wireless charging coil. IPhone 8 on the internal results and the previous generation iPhone 7 similar. iFixit says everything is so familiar.

The dismantling of the Apple iPhone 8 battery capacities compared to the previous generation iPhone 7 to be small, only 1821mAh, while the iPhone 7 has 1960mAh. But thanks to the 10nm process to enhance, I believe the iPhone 8 powers can control better. Apple officially claimed that the iPhone 8 battery life and iPhone 7 the same level.

Review of media reports, September 22, Apple iPhone 8 officially opened on a global scale. Immediately soon, the global exposure of Apple's new product bursts of events. According to incomplete statistics, the current global at least seven iPhone8 series mobile phone because of battery expansion and cracking.

September 2, China Taiwan, an iPhone 8 new machine charging 5 minutes after the battery drum package; October 2, Hong Kong, China came iPhone 8 battery expansion, fuselage burst; October 3, Taichung also heard a case, According to the industry, this iPhone 8 is in the standby state without warning bulging deformation; previously, there are reports that Japan also appeared iPhone 8 battery expansion event; Canadian Apple users Anthony Wu said he bought a new iPhone on Sunday 8 Plus, on Monday to go back, because the screen was distracted; Greek Apple equipment repair shop iRepair also provides a photo, the photo phone display was distracted. iRepair revealed that customers from the box out of the phone, filled the night power, the next morning found the phone screen was distracted. The customer is charged with Apple's official charger and data cable.

Up to now, Apple's mobile phone is just cracked, and will not be recalled, nor will it be banned by the airline. Even if the new use of Apple's SDI battery is also no need to worry too much, because the various brands of batteries are not the same, even by a supplier of supply, but the size of the battery, the density is defined by the manufacturers themselves, and the current Battery technology and design reasons lead to any battery explosion will occur, the probability is about three parts per million, the probability of the problem occurs, is a normal phenomenon, obviously the explosion of Samsung is a problem, and Apple should find as soon as possible The problem, give the user a response.

Another view is that Apple's new product burst is caused by the use of metal in the box plus the glass back cover. 5G and wireless charging and other reasons lead to mobile phone carrying a glass back cover to become a trend, iPhone is no exception. The reason for the bursting of the battery may not only be in the battery, but also in the battery and the combination of mobile phones, as well as the battery near the heat, etc. When the above problems, the glass stretching space is relatively small, the glass material and the screen will crack between, and in the past when using metal fuselage, there is no such problem, because the metal carrying capacity is higher.

Recently Apple has responded to the media, the initial investigation result of situation is the emergence of the battery swelling, but it’s not a serious safety incident, and has nothing to do with the explosion, the detailed investigation results will be confirmed once announced. However, for the situation of mobile phone battery suppliers that outside world concerned about, Apple has not responded. Even if all kinds of troubles come around, at present iPhone 8 is still one of the hottest selling smartphone models. It is recommended to equip a Charging Phone Case For iPhone 7, 7 plus, 8, 8 plus in order to get rid of unexpected incidents. 

Nano micro suction car mobile phone bracket

When you are tangled of whether asking price of 12 Yuan of mobile phone shell will include shipping, the mainstream hot selling car phone stand has been asking for half a hundred Yuan, and sales results proud. Mobile phone car bracket features a simple, simple structure, but for such a simple thing, consumers have to face too many choices, for which, Chris Cui from Cell Phone Age com spent 200 Yuan on online shopping four car phone stands that relatively representative, trying to from Installation difficulty, mobile phone pick-up convenience and stability and other aspects to explore which is more suitable for most people.

We pay attention to the current mainstream commercial platform sales of several car phone stent prices concentrated in the 45-60 Yuan range, from the sales situation, to remove cheap goods, we have the car phone stand as part of the car interior, 50 Yuan or so the price has been accepted by everyone. The price is not a problem; the most difficult is in the end what kind of election?

For driving people, the phone in the car fixed way has been a headache problem, the general car in the early design did not take into account the driver's mobile phone placement. Especially in the current mobile phone navigation software spike car factory navigation environment, in the car to install a compact and practical car phone stand is very necessary. It can easily let you release the hands, especially in the car, and we put the phone on the phone stand. This can release the hands, the focus on driving, you can listen to songs or see navigation, and the use of mobile phones at the same time also reached the purpose of safe driving, to reduce the risk of dangerous driving.

The traditional mobile phone stand a wide range, one of the most simple, the most widely used is a magnetic stent, but the magnetic stent is a strong magnetic adsorption principle, must be attached to the back of the phone iron, adsorption to the phone bracket On the magnets. The most fatal weakness that affects the appearance of the phone is that it affects the signal and electronic components of the phone. Because when the phone near the magnetic field, the built-in electronic compass will lose its role, it is difficult to distinguish between the southeast. If long-term use, will be on the phone camera and gyroscope and other components damage.

Today recommended X-ONE Nano-micro-suction non-magnetic mobile phone bracket, the design of the phone will be caused by magnetic interference caused by the magnetic structure, the use of Nano-micro-suction technology, its principle is similar to the number of ultra-small sucker, the surface can be flat Of the objects adsorbed on top, the use of the phone just a little press on the suction surface can be. Products exquisite small, the use of alloy anodizing process.

The mainstream car phone stand style is so many, so there is no standardized naming, according to the installation location and connection, we tentatively on the map of the four forms of mobile phone stalls named as the outlet magnetic, the center console carpet, Console magnetic suction and outlet bracket.

Before buying the car phone stand, first pay attention to their own car outlet leaf shape and center console is flat. Because the installation of the car in the outlet of the car stand only for parallel distribution of the leaves, if the car is a cylinder outlet and divergence of the blade, is not suitable for the use of such car phone bracket; and the center console carpet to be tiled In the center console, the center of the center area and the tilt angle of its greater impact. It is best to sit in the driving position, the phone placed in the default fixed position to determine the correct angle after the phone fixed? Will there be too much to block the front line of sight? Is it convenient to take the phone?

Installed in the center console position of the car phone bracket, most of the way is through the non-trace paste or direct tiling to fix. This type of car bracket on the console to adapt has a bit of demand. Car mobile phone stand can be installed. The sound of the magnetic installation is the most simple; card holder of the center console carpet is also a lot of simple, to the top of a release is, but also have to consider the level of the center console; AutoBot outlet bracket Fixed nose can be adjusted according to the size of the owner of the phone Zhang angle, you want to transfer to the right is a technical live; center console magnetic installation is not difficult, tear 3M paste protective film where to stick where it is So that a stick on the stereotypes, the difficulty lies in the choice of paste the location.

According to the installation location classification can be divided into two kinds, the outlet class and the center console class. Installed in the outlet position of the car phone bracket, by clamping the outlet vane to be fixed. As the outlet leaves need to carry the weight of the phone, so that the direction of the leaves of the outlet cannot be adjusted. In addition, the phone needs to face the outlet blowing out of the cold, coupled with long life; mobile life will be affected, so it is best to keep the car charging habits. At present the Magnetic Car Phone Stand is priced at only 8.18USD at Cell Phone Age com.

Evaluation of iPad 3 compared to surface RT

After looking at the contrast between the iPad mini and Nexus 7, you can see the 7-inch tablet PC market has ushered in a new round of fierce war. In the small size of tablet PC market which Jobs did not care about the Nexus7 was born, so as kindle which have a very attractive charm. And in the iPad to dominate the years of 9.7-inch large-scale tablet PC market there is also not necessarily an iPad alone can sit tightly on NO.1 position. For example, the recent advertising overwhelming Microsoft Surface is a large size product, and then what different is it from iPad?

We take the current iPad 3 and Surface RT for a comparison, the reason why not use the latest iPad 4 (fourth generation iPad short), because in the current domestic iPad 4 is not licensed. The new iPad 4 updates to the A6 processor, the other side interface was changed to Lightning, and the rest is the same with the iPad 3. IPad 3 is currently a large inventory, after reducing price its cost efficiency is also very high, and have a high purchase value.

Appearance contrast: "black man characteristics" and "pure white feminine"

In fact, iPad is also a black frame, but pure white iPad is the most consistent with the characteristics of Apple's product quality, so we brought a white version of iPad for comparison; Microsoft surface RT shell color is not called black, in the official His color on the site is called dark gray silver. There have been friends that Apple's product looks softer, it is not enough "man". Perhaps in the hearts of many users have angular products seem fortunate to have a sense of men. But there are friends that "normal men like bitch", of course, this argument is also a matter of opinion, just let everyone a music only.

IPad 3 external use of silver-white magnesium alloy shell, because it is the metal primary color so it is very texture, simple and refreshing is the iPad to bring the strongest feeling. Surface RT also uses an alloy shell, the external layer of glue spray, this design is to enhance the feel and friction, black appearance appears to be low-key calm, highlighting the business. iPad 3 fuselage edge has a beautiful arc, rounded curved back shell makes hand feeling smooth and comfortable; surface is a corner of the trail, corner feel no iPad comfortable, but this shape There are many users like.

Because the back of the arc because the iPad 3 looks thinner than the surface RT, in fact, the thickness of the two are almost the same, iPad 3 body thickness of 9.4mm, Surface RT body thickness of 9.3mm. If you have an iPhone 4 / 4s (9.3mm), you can try to imagine. In addition the weight of the two are similar, iPad 3 weight of 652g, Surface 676g, it was said that the surface of the screen is 10.6 inches, this weight is very commendable, so really so?

Screen contrast: retina screen is still advantaged

Surface RT screen size is 10.6 inches IPS screen, maximum support 5 touch, the screen the best resolution of 1366 × 768. Surface RT this screen ratio is 16: 9, compared to 4: 3 iPad for its actual visual area or an advantage. iPad screen width 14.8 cm, 19.7 cm high, an area of 291.6 square centimeters, surface screen width of 23.4 cm, 13.2 cm high, an area of 308.7 square centimeters. The actual area exceeds about 17.6 square centimeters, about 6%.

Both are IPS screens, so the viewing angle is almost exactly the same. iPad screen ratio of 4: 3, in the web browsing is very advantageous, vertical can see more class capacity. And the surface RT is the same as the notebook 16: 9, this screen ratio is more suitable for horizontal browsing (win8 metro basic are horizontal browsing), 16: 9 relatively more suitable for movies and photo browsing, this is indeed 4: 3 screen short board.

In order to better support the Win8 system, Surface RT uses the mainstream 1366 × 768 resolution, and compared to iPad 2048 × 1536 resolution the gap is great. Surface RT resolution ppi is 147, while the iPad ppi is reached 264. So if close to check you will see the screen particles. On screen color and viewing angle Surface RT is can be on an equal footing with iPad 3, the only difference is the resolution and delicate degree. For Surface the main reason for not use of ultra-high resolution is that it is not supported by the windows system itself, in the high-resolution Windows system font, the icon of the pixels will not be as IOS fusion, so it looks very small.

Camera contrast: Surface is not enough to understand the "national conditions"

Starting from the iPad 3, the rear camera pixel has been greatly improved, iPad 3 from the iPad 2 70 million pixels suddenly upgrade to 500 million pixels. For the reason why a substantial increase in the rear camera, because some users when going outside will use iPad to take pictures, and iPad camera shooting is very good, so the back camera is also a very important selling point.

Surface RT in this regard is too weak, when a variety of tablet have more than 500W pixels, it has chosen 720P rear and front camera, which is about 100W pixels, the front for the chat camera with the iPad 130W pixel camera is almost the same, but the rear 100W camera used to take pictures is some not enough sincerity. Perhaps Microsoft did not think the user will take this product to take pictures of it. We know that the effect of the camera is not only concerned about the pixels, as well as the aperture size, photographic element area and so on factors, then we take a look at the actual results.

Today's iPad series of products is already very mature, whether it is the appearance of work, or the internal system both have reached the industry's top level. At present the price for Used Apple iPad 3 64GB is only $189.91 on Cell Phone Age com.

Year-end hot shopping fingertips monkeys

2017 year-end shopping season is slowly approaching, there is a toy boom is also swept from online market - fingertips monkeys. The same as their name, the fingertip monkey is a small puppet robot, kids can put it on fingers, and the retail price is only about 15 dollars. The fingertips monkeys are made by WowWee, which is a 34-year-old intelligent interactive toy brand, and has always been committed to put technology into toys. Headquartered in Hong Kong, in the United States, Canada are equipped with branches. The beginning of only the lovely little monkey style has now been extended to some rare animals such as single-legged.

Fingerlings monkey is a touch-type smart toys, can be wrapped at the fingertips, make a different action. It has up to 50 kinds of behavioral movements, both spoiled and acting cute can be easily achieved. Shake them, kiss them, even Hang them up, they will give you lovey response, always witty aware of what you want. Wal-Mart listed Fingerlings Interactive Baby Monkey as the most popular toy type, and the survey is for children between the ages of 1.5 and 12 years old. Amazon also summed up the list of 2017 holiday the most popular 10 toys, of which fingertips monkey ranked the first.

Mia is the toy's name and it's curious about the giant world around! Mia is a purple monkey with soft white hair who loves hanging onto your finger and knows when she is being pet, talked to, and even hung upside down! Fingerlings are adorable baby monkeys that are curious about the world around them—starting with you! These interactive pets love to hang onto your finger, blink their eyes, turn their heads, blow kisses, swing by their tails, and talk in monkey babble! They come in a variety of colours including white, black, pink, purple, blue and turquoise. Adopt them all and have even more fun monkeying around!

This toy trend seems unusually strong, in Instagram and Boomerang there are a lot of search. Huge demand and symbol of "popular toys", for the fingertips monkeys brought a lot of sales, as some models have been sold out, while Gigi the Unicorn is one of them. If you also want to buy a fingertip monkey, you may have to wait in line, or spend more money on eBay to buy. For example, a purple fingernail monkey named Mia because the local retailers have been sold, and the price has been raised by third-party sellers around $ 20, and only accepts reservations.

While the fingertips monkey sold in full swing, WowWee has launched a fingertip unicorn. According to CNN Money reports, fingertip unicorn market demand is very high. Many parents complained about the amazing sales speed of fingertips monkeys in Facebook (they had no time to buy as all sold out), and the high price of online third party sellers. If the 2016 year-end shopping season is the world of Hatchimals toy, then 2017 is definitely the world of fingertips monkey.

"The fingertip monkey is a brand new toy and it will be one of the most important toys in the year-end shopping season, and they are definitely the most popular," said Juli Lennett, industry analyst at NPD's toy industry. Fingertips monkeys launched in August, September detonated list, and quite full of past year’s the fingertips gyro style. According to the manufacturer Wowwee said there are six different fingertips monkeys (Bella, Boris, Finn, Mia, Sophie and Zoe) for people to choose, the initial price of about $ 15 each.  

It is reported that the fingertips monkey manufacturer Wowwee has submitted 28 US trademark applications on the FINGERLINGS, and in some other countries, the application of appearance on the fingertips monkeys has also been authorized to obtain the appearance of protection. However, now in the eBay market, in addition to Wowwee we can still find some other sellers and brand sales of fingertips monkey products, patent-related issues should also lead to export seller's attention.

Since the launch in August, the average number of single reviews on fingertips monkeys has risen quickly, and the peak has reached an average of 87 comments on each item. After September 15, after a large number of new goods began to rush into the market, the average number of comments was declined, as fierce new competition is coming. But from the data indicators, the current market potential is still huge, very worthy of the majority of export sellers to further development.

At present one of top-rated seller is offering Fingerlings Monkey Interactive Baby Toy for sale. Item ships from warehouse in China and will take 2-6 weeks to arrive.